Open-road adventure awaits with big power, cutting-edge tech and unparalleled versatility. Take on any road, any time with confidence aboard the new Versys® 1000 SE LT+. 1,043cc of flexible power keeps you on the move while advanced rider support technology helps promote confidence so you can focus on the adventure. With versatility and tech at its core, the new Versys 1000 SE LT+ boldy takes on any road, any time.Take it for a ride today
Sudden over-application of the brakes, or braking on low-grip surfaces (surfaces with a low coefficient of friction) such as wet asphalt or manhole covers, may cause a motorcycle's wheel(s) to lock up and slip.
Developed and tested through Kawasaki Factory racing, the Assist & Slipper Clutch utilizes two types of cams. An assist cam and a slipper cam enable the Assist & Slipper Clutch to function in two different ways, with the clutch hub working together or apart from the operating plate. Under normal operat
Modern sportbikes often use large-bore throttle bodies to generate high levels of power. However, with large-diameter throttles, when a rider suddenly opens the throttle, the unrestricted torque response is anythin
Using high-precision electronics for engine management, Kawasaki models can achieve a high level of fuel efficiency. However, fuel consumption is greatly affected by throttle use, gear selection, and other elemen
Electronic Cruise Control allows the rider to maintain a desired speed (engine rpm) with the simple press of a button. Because the rider does not have to constantly maintain the throttle position, this system allows relaxed cruising.
Electronic Throttle Valves allow the ECU to deliver the ideal amount of fuel and air to the engine.
Horizontal Back-link Rear Suspension arranges its shock unit horizontally, greatly contributing to efficient use of space and mass centralization.
KCMF (Kawasaki Cornering Management Function) oversees multiple engine and chassis electronic management systems to facilitate smooth cornering.
KIBS (Kawasaki Intelligent anti-lock Brake System) is a high-precision brake system designed specifically for supersport models, offering highly efficient braking while maintaining natural feel.
KQS (Kawasaki Quick Shifter) enables clutchless up- and downshifts.
When accelerating on a slippery surface, it is easy for rear wheel to break loose. KTRC was designed to prevent wheel spin (when the rear wheel turns faster than the front) that could result in the loss
Power modes offer riders an easily selectable choice between Full and Low Power. While Full Power is unrestricted, in Low Power mode maximum power is limited to approximately 75-80% of Full. Response is also milder in L
Smartphone connectivity contributes to an enhanced motorcycling experience by enabling riders to connect to their motorcycle wirelessly.
Cornering lights provide supplemental illumination when cornering, creating a wider illuminated path in the direction the bike is heading.
4-stroke, 4-cylinder, DOHC, 16-valve, liquid-cooled
77.0 x 56.0mm
DFI® with 38mm Keihin ETV throttle bodies (4)
TCBI with digital advance
6-speed, return shift, Kawasaki Quick Shifter (KQS)
43mm inverted fork with KECS-controlled rebound and compression damping, manual spring preload adjustability and top-out springs/5.9 in
Horizontal back-link New Uni-Trak®, BFRC gas charged shock with piggyback reservoir, KECS-controlled compression and rebound damping electronically-adjustable spring preload/5.9 in
75.2 lb-ft @ 7,500 rpm
58.7 in/60.2 in (windshield down/up)
566.7 lb (+ Saddlebags, Handguards, & Hardware approx. 20 lb.)**
Kawasaki Electronic Control Suspension (KECS), Kawasaki Cornering Management Function (KCMF), Kawasaki Traction Control (KTRC), Kawasaki Intelligent anti-lock Brake System (KIBS), Kawasaki Quick Shifter (KQS) (dual direction), Electronic Cruise Control, LED Cornering Lights
Rideology the App Smartphone Connectivity, TFT Instrumentation, Highly Durable Paint, LED Headlight, LED Cornering Lights, LED Taillight
Metallic Flat Spark Black/Pearl Flat Stardust White
12, 24, 36 or 48 months
Dual 310mm petal-style discs with four-piston calipers, ABS
Single 250mm petal disc with single-piston caliper, ABS
24 Month Limited Warranty
**Curb weight includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90 percent capacity) and tool kit (if supplied).
Specifications subject to change
KAWASAKI CARES: Always wear a helmet, eye protection, and proper apparel. Never ride under the influence of drugs or alcohol. Read Owner’s Manual and all on-product warnings. Professional rider shown on a closed course. ©2020 Kawasaki Motors Corp., U.S.A.
Sudden over-application of the brakes, or braking on low-grip surfaces (surfaces with a low coefficient of friction) such as wet asphalt or manhole covers, may cause a motorcycle's wheel(s) to lock up and slip. ABS was developed to prevent such incidents. Kawasaki ABS systems are controlled by highly precise and extremely reliable programming formulated thorough testing of numerous riding situations. By ensuring stable braking performance, they offer rider reassurance for even greater riding enjoyment.
To meet the special requirements of certain riders, specialized ABS systems are also available. For example, KIBS (Kawasaki Intelligent anti-lock Brake System) is a precision-tuned brake system designed specifically for supersport models, enabling sport riding to be enjoyed by a wider range of riders. By linking the front and rear brakes, K-ACT (Kawasaki Advanced Coactive-braking Technology) ABS provides the confidence to enjoy touring on heavyweight models. Kawasaki is continually working on the development of other advanced ABS systems.
Developed and tested through Kawasaki Factory racing, the Assist & Slipper Clutch utilizes two types of cams. An assist cam and a slipper cam enable the Assist & Slipper Clutch to function in two different ways, with the clutch hub working together or apart from the operating plate.
Under normal operation, the assist cam functions as a self-servo mechanism, pulling the clutch hub and operating plate together to compress the clutch plates. This allows the total clutch-spring load to be reduced, resulting in a lighter clutch feel at the lever.
When excessive engine braking occurs – as a result of quick downshifts (or an accidental downshift) – the slipper cam comes into play, forcing the clutch hub and operating plate apart. This relieves pressure on the clutch plates to reduce back-torque and help prevent the rear tire from hopping and skidding.
Modern sportbikes often use large-bore throttle bodies to generate high levels of power. However, with large-diameter throttles, when a rider suddenly twists the throttle, the unrestricted torque response is anything but gentle, and often more than the rider can handle. Dual throttle valve technology was designed to tame engine response while enabling high performance.
On fuel-injected models, throttle bodies generally have only one throttle valve per cylinder. On models with dual throttle valves, there are two per cylinder: in addition to the main valves, which are physically linked to the throttle grip and controlled by the rider, a second set of valves, controlled by the ECU, precisely regulates intake airflow to ensure a natural, linear response. With the air passing through the throttle bodies flowing smoothly, combustion efficiency is improved and power is increased.
Like other Kawasaki engine management technology, Dual Throttle Valves were designed with the philosophy of "following the rider's intention, while providing natural-feeling support." They are featured on many Kawasaki models.
Using high-precision electronics for engine management, Kawasaki models can achieve a high level of fuel efficiency. However, fuel consumption is greatly affected by throttle use, gear selection, and other elements under the rider's control. The Economical Riding Indicator is a function that signals when current riding conditions are consuming an optimally low amount of fuel. The system continuously monitors fuel consumption, regardless of vehicle speed, engine speed, throttle position and other riding conditions. When fuel consumption is low for a given speed (i.e., fuel efficiency is high), an "ECO" emblem appears on the LCD screen of the instrument panel. By riding so that the "ECO" mark remains on, fuel consumption can be minimized.
While effective vehicle speed and engine speed may vary by model, paying attention to conditions that cause the "ECO" mark to appear can help riders improve their fuel efficiency – a handy way to increase cruising range. Further, keeping fuel consumption low also helps minimize negative impact on the environment.
Electronic Cruise Control allows the rider to maintain a desired speed (engine rpm) with the simple press of a button. Because the rider does not have to constantly maintain the throttle position, this system allows relaxed cruising. This reduces stress on the right hand when traveling long distances, contributing to a high level of riding comfort.
Electronic Cruise Control is featured on Kawasaki's Vulcan 1700 / VN1700 Series cruisers and Jet Ski Ultra 300X and 300LX personal watercraft series. These models are equipped with an Electronic Throttle Valve system, meaning the throttle valves are not actuated directly by twisting the throttle grip (or pulling the throttle lever); rather, a position sensor on the throttle grip sends a signal to the ECU that determines the ideal throttle position. This is how Electronic Cruise Control is able to automatically adjust engine power to maintain vehicle speed when ascending or descending grades in the road. Without the precise control enabled by Electronic Throttle Valves, functions like Electronic Cruise Control would not be possible.
Kawasaki’s fully electronic throttle actuation system enables the ECU to control the volume of both the fuel (via fuel injectors) and the air (via throttle valves) delivered to the engine. Ideal fuel injection and throttle valve position results in smooth, natural engine response and the ideal engine output. The system also makes a significant contribution to reduced emissions.
Electronic throttle valves also enable more precise control of electronic engine management systems like S-KTRC and KTRC, and allow the implementation of electronic systems like KLCM, Kawasaki Engine Brake Control, and Cruise Control.
When comparing Kawasaki's traditional Uni-Trak® rear suspension, which mounts the shock unit vertically, with Horizontal Back-link rear suspension, the shock unit is almost horizontal. Kawasaki's original suspension arrangement places the shock unit very close to the bike's center of gravity, greatly contributing to mass centralization. And because there is no linkage or shock unit protruding beneath the swingarm, this frees up space for a larger exhaust pre-chamber (an exhaust expansion chamber situated just upstream of the silencer). With a larger pre-chamber, silencer volume can be reduced, and heavy exhaust components can be concentrated closer to the center of the bike, further contributing to mass centralization. The overall result is greatly improved handling.
Another benefit is that the shock unit is placed far away from exhaust heat. Because it is more difficult for exhaust heat to adversely affect suspension oil and gas pressure, suspension performance is more consistent. Horizontal Back-link Rear Suspension offers numerous secondary benefits like this.
Using the latest evolution of Kawasaki’s advanced modeling software and feedback from a compact IMU (Inertial Measurement Unit) that gives an even clearer real-time picture of chassis orientation, KCMF monitors engine and chassis parameters throughout the corner – from entry, through the apex, to corner exit – modulating brake force and engine power to facilitate smooth transition from acceleration to braking and back again, and to assist riders in tracing their intended line through the corner. The systems that KCMF oversees vary by model, but may include:
Kawasaki developed KIBS to take into account the particular handling characteristics of supersport motorcycles, ensuring highly efficient braking with minimal intrusion during aggressive sport riding. It is the first mass-production brake system to link the ABS ECU (Electronic Control Unit) and engine ECU.
In addition to front and rear wheel speed, KIBS monitors hydraulic pressure of the front brake caliper(s), throttle position, engine speed, clutch actuation and gear position. This diverse information is analyzed to determine the ideal hydraulic pressure for the front brake. Through precise control, the large drops in hydraulic pressure seen on standard ABS systems can be avoided. Additionally, the tendency for the rear wheel of supersport models to lift under heavy braking can be suppressed, allowing the rider to maintain control of the rear brake when downshifting.
Designed to help riders maximise their acceleration on the circuit by enabling clutchless upshifts with the throttle fully open, KQS detects that the shift lever has been actuated and sends a signal to the ECU to cut ignition so that the next gear can be engaged without having to use the clutch. Depending on ECU settings (or when a race kit ECU is used), clutchless downshifts are also possible.
When accelerating on a slippery surface, it is easy for the rear wheel to break loose. KTRC was designed to prevent wheel spin (when the rear wheel turns faster than the front) that could result in the loss of control of the bike. Just as ABS prevents the wheels from locking up when braking, this Kawasaki-original Traction Control system prevents the rear tire from slipping. Knowing that the system will intervene to prevent sudden wheel-spin (for example, when the pavement comes to an abrupt end when touring) is a great source of reassurance for riders.
KTRC uses wheel speed sensors to monitor front and rear wheel speed. Engine power is reduced when wheel spin is detected, allowing the rear wheel to regained its grip on the road. KTRC also enables the rear wheel to regain traction in situations where grip is lost temporarily, like when riding over a wet manhole cover.
KTRC uses 3-way control, governing ignition timing, fuel volume and (via the sub-throttle valves) intake air volume. This 3-way control is what enables the system to operate so smoothly, resulting in a very natural and reassuring feel.
It is technologically possible for Traction Control systems to recover from loss of grip without the rider ever realizing that they slipped. However, KTRC lets riders know when road conditions are slippery by purposely delaying intervention for an instant. This is done for two reasons: first, to communicate an accurate picture of current road conditions and what the bike is doing, and second, to ensure that systems provide support for riders – this is the philosophy that drives development of Kawasaki technology.
Power modes offer riders an easily selectable choice between Full and Low Power. While Full Power is unrestricted, in Low Power mode, maximum power is limited to approximately 75-80% of Full. Throttle response is also milder in Low Power mode. Riders may opt to use Low Power mode for rainy conditions or city riding, and Full Power when sport riding.
Available on the Ninja® ZX™-14R / ZZR1400, Versys® 1000 and other Kawasaki models, when combined with the 3-mode KTRC (+ OFF) Traction Control system, Power Mode selection offers a total of eight combinations (KTRC: Mode 1/2/3/+OFF x Power Mode: Full/Low) to suit a wide range of riding situations. For example, an experienced rider enjoying sport riding on dry pavement might choose Full Power and Mode 1. On a wet or slippery surface, choosing Low Power and Mode 3 would yield the lowest chance of incurring wheel-spin, and the milder throttle response would offer a higher level of riding safety.
Clever technology enables riders to connect to their motorcycle wirelessly.
Using the smartphone application “RIDEOLOGY THE APP,” a number of instrument functions can be accessed, contributing to an enhanced motorcycling experience. Vehicle information (such as the odometer, fuel gauge, maintenance schedule, etc) can be viewed on the smartphone. Riding logs (varies by model, but may include GPS route, gear position, rpm, and other information) can be viewed on the smartphone. When connected, telephone (call, mail) notices are displayed on the instrument panel. Riders can also make changes to their motorcycle’s instrument display settings (preferred units, clock and date setting, etc) via the smartphone. And on certain models, it is even possible to check and adjust vehicle settings (such as Rider Mode, electronic rider support features, and payload settings) using the smartphone.
Sets of three LED lights built into each side of the fairing help illuminate the road when cornering at night. Each of the three lights has a fixed direction and is activated based on lean angle. As the bike leans over, the lights come on in order, creating a wider illuminated path in the direction the bike is heading.